H2020Индивидуална стипендия2020–2022

TANBCPdyes · Triggerable, Anchoring Novel Block Copolymer Dyes for Use in Inkjet Printing

„Хоризонт 2020“ — Действия „Мария Склодовска-Кюри“

Период: 2020-09-01 → 2022-11-04
Финансиране от ЕС: 224 934 €
Участници: 1
Схема: MSCA-IF

Линиите свързват координатора с партньорите.

Накратко на български

Нови блок-кополимерни багрила се разработват за мастилноструен печат, например за опаковки на храни. Те позволяват замяната на токсичните органични разтворители с вода, която става устойчива след термична обработка.

Този кратък обзор е генериран от изкуствен интелект

Кратко обяснение, генерирано от езиков модел по текста на CORDIS. Оригиналът е по-долу.

Резултати накратко

Triggerable, Anchoring Novel Block Copolymer Dyes for Use in Inkjet Printing

This project, “Triggerable, Anchoring Novel Block Copolymer Dyes (BCP dyes) for Use in Inkjet Printing” (TANBCPdyes), is an intersectoral multidisciplinary project working on the development of a new technology platform based on specially-designed materials (BCP dyes). The development of novel inkjet printing materials is greatly needed to satisfy the growing demands of this quickly evolving market which spans applications including simple home & office devices to food packaging and high-tech inkjet printing of displays. The synthesized BCP dyes have been designed to be processed from water, an environmentally friendly solvent (thus eliminating the use of hazardous volatile organic solvents in the process) and will become insoluble & water resistant after deposition on the substrate. Therefore, the new materials act as waterborne dyes in a wet state & become fixed onto the substrates after thermal treatment. Success will allow novel BCP dyes to be manufactured on a large scale at high-throughput levels by drawing on the expertise of the industrial partner, Domino UK Ltd, which will allow industries to reinforce their position in the global technological race in the field of inkjet printing and crucially shift from using toxic, hazardous organic solvents. The key research objectives (RO) of TANBCPdyes are as follows: RO1. Synthesis of novel triggerable anchoring BCP dyes. RO2. Self-assembly capability and properties of BCP dyes in water. RO3. Evaluation of triggerable behaviour and material properties in thin film. RO4. Inkjet printing performance and anchoring on food packaging.

Текст от CORDIS, на английски · Данни: CORDIS, © Европейски съюз

Цел на проекта

This project, “Triggerable, Anchoring Novel Block Copolymer Dyes (BCP dyes) for Use in Inkjet Printing” (TANBCPdyes), is an intersectoral multidisciplinary project that will develop a new technology platform based on specially-designed materials. The development of novel inkjet printing materials is greatly needed to satisfy the growing demands of this quickly evolving market which spans applications including simple home & office devices to food packaging and high-tech inkjet printing of displays. The synthesized BCP dyes will be processed from water, an environmentally friendly solvent (thus eliminating the use of hazardous volatile organic solvents in the process), but will become insoluble & water resistant after deposition on the substrate. Therefore, new materials will act as waterborne dyes in a wet state & become fixed onto the substrates after thermal treatment. Success will allow novel BCP dyes to be manufactured on a large scale at high-throughput levels by drawing on the expertise of Aston University, University of Warwick, University of Tubingen & the industrial partner, Domino UK Ltd, which will allow EU industries to reinforce their position in the global technological race in the field of inkjet printing. The Fellow will develop new scientific skills through the synthesis & advanced characterisation of BCP dyes; benefit from the direct mentoring and supervision of a team of renowned EU scientists (Prof Topham, Prof Perrier, Dr Leslie, Prof Peisert and Dr Harries); gain professional training to promote his growth & independence; take significant steps toward establishing his own network of EU researchers, & also enhance his relationships with Aston & the secondment project partners (Warwick, Tubingen & Domino). The Fellow will bring his expertise in polycondensation chemistry, membrane technology, biomolecules (e.g. proteins) separation, and conductive/photoactive nanomaterials to Aston, creating new research avenues in the Topham group.

Оригинален текст от CORDIS (на английски).

Участници

ASTON UNIVERSITY · BirminghamКоординаторОбединеното кралство