FP6Друго2008–2009

TRICODES · Research and development of tribological coatings with tailored desorption properties

6РП — Действия „Мария Кюри“

Период: 2008-06-01 → 2009-05-31
Финансиране от ЕС: 30 200 €
Участници: 1
Схема: —

Линиите свързват координатора с партньорите. За проекти отпреди 2014 г. CORDIS не винаги дава точни координати. Тези точки са на ниво град или държава.

Накратко на български

Специални покрития за лагери се разработват така, че да контролират отделянето на вещества при триене. Това помага за подобряване на характеристиките на частите и създаване на нови методи за тяхното изследване.

Този кратък обзор е генериран от изкуствен интелект

Кратко обяснение, генерирано от езиков модел по текста на CORDIS. Оригиналът е по-долу.

Резултати накратко

Final Activity Report Summary - TRICODES (Research and development of tribological coatings with tailored desorption properties)

Coatings with tailored tribodesorption properties were developed and experimentally tested during the reintegration phase of the project. A new method for the characterisation of tribodesorption from coatings used in ball bearings was also developed. This method and new tailored coatings were under patenting by the time of the project completion. The results of the research were published in one paper and presented on two international and national topic conferences. The results of the performed research would be used to obtain the higher qualification in Russia, i.e. Doctor of Science, by Dr R. Nevshupa.

Текст от CORDIS, на английски · Данни: CORDIS, © Европейски съюз

Цел на проекта

Novel smart" tribological coatings with tailored out-gassing properties will be developed for using in intelligent vacuum machinery of new generation. The peculiar property of the "smart" tribological coatings is that, in addition to good tribological performance, they have given gas desorption behaviour controlled by destructive processes, i.e. fracture, plastic deformation, wear, etc. The coatings should be tailored in such a way that they will be able to send "desorption message" when some failure of the coating has happened.To achieve the aim of the project the following stages have been identified:(1) survey and analysis of existing tribological coating in relevance to vacuum applications,(2) experimental research of the tribodesorption behaviour fo r the wide range of materials in order to achieve fundamental understanding of the phenomenon,(3) modelling of tribodesorption and(4) development of the coatings.The later stage includes development of the structure and chemical composition of the coating, selection of appropriate deposition techniques, etc. providing given out-gassing properties and behaviour of the tribologocal coatings."

Оригинален текст от CORDIS (на английски).

Участници

BAUMAN MOSCOW STATE TECHNICAL UNIVERSITY · MOSCOWКоординаторНиво градРусия

Връзки

Виж в CORDIS