AMABIO · Active manipulation of Biomolecules in microfluidic arrays
6РП — Действия „Мария Кюри“
- Период
- 2005-10-01 → 2006-09-30
- Финансиране от ЕС
- 72 156 €
- Участници
- 1
- Схема
- IIF
Линиите свързват координатора с партньорите.
Накратко на български
Микрофлуидните устройства за управление на биомолекули се изследват чрез създаване на софтуер за проектиране и нови методи за изработка на миниатюрни помпи и клапани. Тези разработки помагат за по-бързото създаване на чипове, които прецизно транспортират и смесват биологични вещества.
Кратко обяснение, генерирано от езиков модел по текста на CORDIS. Оригиналът е по-долу.
Резултати накратко
Final Activity Report Summary - AMABIO (Active Manipulation of Biomolecules in Microfluidic Arrays)
The AMABIO project dealt with several aspects of microfluidic devices designed for the manipulation of biomolecules. These devices generally consist of a network of channels that transport fluids carrying the biomolecules as well as pumps and valves for injecting, regulating and controlling the flow. Additional components might also include a mixer for mixing reagents and heaters or coolers to bring the fluid to an optimal temperature. The first part of the project involved the development of a comprehensive computational tool for the preliminary design and analysis of the flow in the microfluidic network. It could handle both directed pressure and electroosmotic flows. Since the handling of biomolecules often requires movement in converging and diverging passages, a provision was made for the inclusion of varying area channels in the network. The simple theory behind the computation took full advantage of the linear nature of the low Reynolds number flows that are usually encountered in these devices. Apart from the development of the computational tool, a major focus of this project was to develop and refine fabrication methods for these devices with an aim towards rapid prototyping. The focus was on developing truly on-a-chip systems for the pumps and valves. For the valves, two options were investigated, and were still under investigation by the time of the project completion, including the use of bubbles and the deformation of cantilever glass beams. The latter option also required the fabrication of bell-shaped channels, and this was examined as well. In addition, we developed and demonstrated a novel electroosmotic pump that was relatively easy to fabricate, assemble and operate. It used patterned electrodes and alternating current (AC) for bubble-free operation. The observed speeds were on the order of 5 mm/s but this could be improved with further optimisation of the design.
Текст от CORDIS, на английски · Данни: CORDIS, © Европейски съюз
Цел на проекта
The proposed research deals with the problem of sorting and separating biomolecules using a microfluidic network of micron- or nanometre-sized channels. The flow in the network is driven by electrical potentials induced by electrodes placed at various node s of the network. We propose to carry out a comprehensive study (both analytical and computational) of the resulting electroosmotic flow (EOF) in the network in order to determine the channel configuration and the electric potential distribution required t o propel different sized molecules to exit through different outlet channels.The essentially flat velocity profile of EOF should provide higher resolution and much quicker process times than the traditional method of gel eletrophoretic separation. A novel feature that we are proposing is to employ slowly converging inlet channels (for reducing the entropic forces) and slowly diverging outlet channels (for ease of collecting the separated molecules). Our ultimate aim is to integrate the computational scheme we develop with micro-fabrication procedures to rapidly prototype custom-designed channel configurations for particular applications.
Оригинален текст от CORDIS (на английски).
Участници
- SCUOLA SUPERIORE DI STUDI UNIVERSITARI E DI PERFEZIONAMENTO SANT'ANNA · PISAКоординаторИталия
Връзки
Данни: CORDIS, © Европейски съюз